Balanced float valve to improve the water leakage problem caused by high water pressure in the water tower

Balanced float valve Many users often suffer from the excessive pressure of tap water, which causes the water tower to overflow. After using the balanced float, it completely improves their life problems. Let’s take a look at a few real cases.

Balanced float valve – no longer worry about the overflow problem of the water tower with high water pressure in the middle of the night

Many users often find that the float valve cannot stop the water in the middle of the night, which is quite troubled. Not during the day, but often happens at night. This is because the amount of tap water used in the middle of the night is small, resulting in too high water pressure, making the water tower float unable to resist the high water pressure and overflow. For this, you must find a floating ball with high pressure resistance, otherwise you will not be at peace in the middle of the night.

The water stop device of the water tower uses the floating ball force and the length of the lever to resist the water pressure. Therefore, a larger float and a longer lever are required to stop the high-pressure tap water. As a result, not only the installation is laborious, but the rubber in the float valve is easily fatigued due to the resistance to the water pressure, causing the water tower to overflow.

East Star balanced float valve, solve high water pressure and your troubles

Only East star Float Valve uses the piston and valve inside the valve to balance the water pressure in the device, so there is no need to rely on floats and levers to counter the water pressure. When the tap water enters the valve, the water pressure goes up and down, and the pressure is equalized, which dilutes the water pressure that the floating ball has to withstand. It is no wonder that the short rod of the small ball can resist the high water pressure, and the flow rate is extremely large. , The service life is longer.

With it, you can sleep peacefully from now on, and no longer worry about high water pressure and water tower overflow.

• 

Cases of using balanced float valves to improve high water pressure in a water tower

Many users often suffer from the excessive pressure of the tap water, which causes the water tower to overflow. After using the balanced float, it completely improves their life problems. Let’s take a look at a few real cases.

Case 1：After Miaoli Master Wen used this float valve, the water leakage problem of the owner was improved.

Master Wen from Miaoli couldn’t improve the water leakage problem of the floating ball for a long time. He originally planned to switch to a float control valve. Fortunately, he found us. After using the balanced float, the owner’s water tower no longer leaks due to high water pressure. And the design that can adjust the angle also made him very satisfied.

Case 2： Mr. Xu from Keelung City has changed several sets of float valves until he used this product to completely stop the leakage.

Mr. Xu from Zhongshan District, Keelung City also encountered high water pressure and tried several sets of float valve products, but the problem could not be improved, so the Velociraptor float valve was used.

Mr. Xu also called specifically to say that the traditional float valve he bought in the past failed within a few days. Observing my product for some time, I hope that buying this product can improve the water leakage problem in the past. I said, don’t worry, this product can resist the pressure of tap water and is definitely sufficient. If you are satisfied with it, share a video and let me promote it. Mr. Xu was quite satisfied after using it for a period of time. He felt that this product had large flow, high pressure resistance, easy installation, low cost, and high CP value. He bought two more as spare parts.

In addition, there is a plastic pipe tied with a red wire in the film to prevent excessive water pressure from causing a rumble.

Case 3：Mr. Yang from Dashu in Kaohsiung used this product and the water tower no longer leaks in the middle of the night

When I first saw Mr. Dashu Yang buying this product through the Internet, I knew that due to the high water pressure in the middle of the night, the traditional L type float valve would leak. I told Mr. Yang, don’t worry, using this product will definitely not let you down. After many days of testing, Mr. Yang has slept peacefully in the past few days. The water tower no longer leaks due to the high water pressure in the middle of the night. He is very satisfied.

At my invitation, Mr. Yang shared these two videos. I hope this can help many friends who are suffering from water pressure and water leakage to use this balanced float valve to improve the problem. I also hope that friends can share it and help more people use the balanced float valve with better quality.

Case 4：Master Wu from Taitung Taimali solved the problem of high water pressure without a pressure reducing valve.

Master Wu in Taitung Taimali used to suffer from damage to floats caused by high water pressure. Since I purchased a balanced float from me at the beginning of last year, it has greatly improved the user’s water leakage problem. Even his father, who has been doing hydropower for more than 30 years, praised this product. Many colleagues in the industry were scolded by the owners for leaking water towers. Everyone said they would buy an expensive pressure reducing valve. A friend turned to him for help. He introduced this balanced float valve. After the friend used it, he smiled. , Happily, it’s really super easy to use. The following video is the ABS balanced float valve shared by Master Wu, click to watch:

Master Wu continued purchasing products and has bought hundreds of sets from him so far. This product is good in quality and reasonable price, welcome to share to your friends.