How to choose the water tower inlet valve? Now there is a new patented ABS floating ball, which changes the traditional copper product-use lever to resist the water pressure. When the water enters, the internal water pressure between the upper piston and the lower valve is balanced up and down, which extends the rubber service life, high pressure resistance, large flow, sturdy and durable material. The hydropower masters who have been used are full of praise.
Mr. Qin from Neihu, Taipei, used a traditional float valve at the construction site of the new case.
Because the front end of the pipe had a pressure pump and the water pressure was strong, the float valve exploded not long after he bought it.
So he switched to use the Velociraptor brand balanced float, and the effect was really good. It took half a year to help him overcome difficulties and successfully complete the handover facilities.
Balanced float valve can bear high water flow and supply a large water.
Don’t look at its appearance is just plastic steel, in fact, plastic steel is much better than copper.
Many consumers follow the old ways and think that copper products are good, but this is actually a wrong concept.
No matter L-type or American style ball valve, its material is sand copper, as the name implies, there will be sand sores. As long as the water pressure is strong, the water knife will cut off the copper skin layer by layer, layer by layer. Therefore, most of the copper ball valves can not withstand the water pressure. For example, in mountainous areas with high water pressure, the traditional ball valve must be replaced in a short time.
Some consumers think that plastics can’t be exposed to the sun, so you may have to observe, is your motorcycle shell made of vanadium alloy? Is it made of Adelman steel?
If you look carefully, it is also plastic, and its shell is not thick. How can you let it be exposed to wind and rain for years? Are you not afraid that it will be struck by thunder and lightning?
Maybe you will think the locomotive shell is sturdyer .
You are right, ABS material is shockproof, acid and alkali resistance, can withstand the sun exposure and the rain erosion. And Velociraptor brand float valve is made form ABS, too.
At this time, you look at the motorcycle that has accompanied you for many years, and then look at the Velociraptor floating ball valve, do you think can it also accompany you for many years?
ABS material can withstand the sun exposure and the rain erosion. It is still very well afetr having used for 6 years. Balnced float valve is easy to shut off the water flow.
People say that the devil is hidden in the details. It is useless to look at the appearance of the product, and the floating ball valve is sealed by rubber. If the rubber of the floating ball valve can not stop leaking, even if you use vanadium alloy and Adelman steel for the shell, your home may still cause flood. The Velociraptor floating ball valve adopts the piston, valve – water pressure balance design, which extends the service life of the rubber, high pressure resistance and large flow. With the plastic steel shell, the service life is much longer than the traditional ball valve for many years.
ABS balanced float valve supply a large water. ABS balanced float valve supply bears a high water flow.
To buy a float valve, you have to buy a high-pressure resistant the Velociraptor floating ball valve, made of ABS material, impact resistant, acid and alkali resistant, no matter how high the water pressure is, you will not worry about the leakage of the water tower.
Professional plumbers all know that the Velociraptor brand floating ball valve is very different.
In many areas, the water pressure is high and high-pressure-resistant float valves are required to block this water potential. The Velociraptor floating ball valve is resistant to high pressure and has a large flow rate, not the traditional floating ball valve can be compared.
Master Lin of the Kaohsiung Zhengyi Hydropower Station installed a set of traditional float valve in Fo Guang Shan, which could not withstand the impact of the violent water pressure and leaked immediately. He hurriedly drove more than two hours to Linyuan and purchased the Velociraptor brand ABS floating ball valve that can not only stop the water easily after use, but also has a large flow rate, which made the abbot of Fo Guang Shan quite satisfied.
ABS material float ball valve, high pressure resistance, large flow, long service life, deeply recognized by many professional plumbers. The professional plumbers who feel satisfied after using the product ordered dozens of groups at a time.
Velociraptor brand floating ball valves are very different 
The professional plumbers who feel satisfied after using the product ordered dozens of groups at a time.
The water tower won’t leak due to high water pressure after using ABS balanced float valve.
The size of ABS balanced float valve is from 1/2″ to 4″, if you are interesting in it, welcome to contact us by the following way.
點擊或掃描下面圖示，聯絡我們
服務電話 : 07-6469085
Line id : @876zdzyb
