{"id":8100,"date":"2021-09-15T23:39:16","date_gmt":"2021-09-15T15:39:16","guid":{"rendered":"https:\/\/www.absfloat.com\/8100\/solar-auxiliary-water-tank-float-valve-small-size-and-high-pressure-resistance"},"modified":"2021-10-05T12:15:56","modified_gmt":"2021-10-05T04:15:56","slug":"solar-water-tank","status":"publish","type":"post","link":"https:\/\/www.absfloat.com\/en\/8100\/solar-water-tank","title":{"rendered":"Solar auxiliary water tank float valve Small size and high pressure resistance"},"content":{"rendered":"\n

The solar auxiliary water tank is filled with cold water by a pressurized motor. Due to the small space of the auxiliary water tank and the high water pressure, it is the best choice to use a water inlet float valve with a high pressure resistance and a small volume. <\/p>\n\n\n\n

\"\"
Balanced float valve, small ball short rod can withstand high pressure<\/figcaption><\/figure>\n\n\n\n\n\n\n\n

Solar auxiliary water tank-the water pressure on the floating ball is large <\/h2>\n\n\n\n

The structure of the solar auxiliary water tank is similar to the structure of the bathroom water tank. The water source is fed from the water inlet, and the floating ball is used to withstand the water pressure of the pressurized motor. When the water volume is insufficient, the water is filled into the tank. Close the valve to enter the water. The floating ball is connected to the cold water supply of the solar water heater for water replenishment. <\/p>\n\n\n\n

  • \"Solar
    Solar water tank float valve<\/figcaption><\/figure><\/li>
  • \"Solar
    Solar water inlet<\/figcaption><\/figure><\/li>
  • \"Solar
    Solar water tank water inlet<\/figcaption><\/figure><\/li>
  • \"Solar
    Solar water tank float valve<\/figcaption><\/figure><\/li>
  • \"Solar
    Solar water tank float valve<\/figcaption><\/figure><\/li>
  • \"Solar
    Solar water tank float valve<\/figcaption><\/figure><\/li>
  • \"Solar
    Solar water tank float valve<\/figcaption><\/figure><\/li>
  • \"Solar
    Solar water tank float valve<\/figcaption><\/figure><\/li>
  • \"Solar
    Solar water tank float valve<\/figcaption><\/figure><\/li>
  • \"Solar
    Solar water tank float valve exchange<\/figcaption><\/figure><\/li>
  • \"Solar
    Solar water tank float valve<\/figcaption><\/figure><\/li>
  • \"balanced
    balanced water tank float valve<\/figcaption><\/figure><\/li>
  • \"balanced
    balanced water tank float valve<\/figcaption><\/figure><\/li>
  • \"balanced
    balanced water tank float valve<\/figcaption><\/figure><\/li>
  • \"Solar
    Solar water tank float valve exchange<\/figcaption><\/figure><\/li><\/ul><\/figure>\n\n\n\n

    It is a traditional and common way to use the auxiliary water tank to supply cold water to the solar water heater. However, since the water supply process cannot be filled in place at one time, it often causes the pressurizing motor to run intermittently, which may easily cause damage to the pressurizing motor. Some manufacturers’ auxiliary water tanks even use plastic buckets that cannot bear the pressure to transfer the pressure to the floating ball valve. <\/p>\n\n\n\n

    • \"Solar
      Solar water tank float valve<\/figcaption><\/figure><\/li>
    • \"ABS
      ABS material, impact resistance, acid and alkali resistance<\/figcaption><\/figure><\/li><\/ul><\/figure>\n\n\n\n

      In addition, after the auxiliary water tank is installed, the cold water pressure will become smaller, so there will be different pressures of the cold and hot water, resulting in sudden cold and hot. In order to avoid these problems, some customers will increase the height of the water tower and do not use the auxiliary water tank to reduce the maintenance cost of the booster motor. However, when the general owner asks the manufacturer to assemble the solar water heater, the auxiliary water tank is still the majority. Therefore, in order to withstand the high water pressure of the auxiliary water tank, it is recommended that your float water inlet should use a pressure-resistant float valve. <\/p>\n\n\n\n

      \"The
      The solar sub-tank uses a small and high-pressure-resistant float valve. <\/figcaption><\/figure><\/div>\n\n\n\n
      \"\"\/
      the function and size of ABS balanced float valve is just right <\/figcaption><\/figure>\n\n\n\n

      the function and size of ABS balanced float valve is just right <\/h2>\n\n\n\n

      In view of the fact that the auxiliary water tank configured by the manufacturer is usually not large, sorecommend you to use ABS high pressure float valve<\/strong>\u3002 <\/p>\n\n\n\n

      \"Suncue
      Suncue water tank float vavle<\/figcaption><\/figure>\n\n\n\n

      ABS float valve can withstand high water pressure. It is not easy to be destroyed due to water pressure. However, if your water is not good and the sediment is too much, you can install a set of filters to avoid fouling blocking the valve and causing the float valve failed. <\/p>\n\n\n\n

      • \"\"
        Suncue water tank is small.<\/figcaption><\/figure><\/li>
      • \"Suncue
        Rely on balanced float valve to stop water flow<\/figcaption><\/figure><\/li><\/ul><\/figure>\n\n\n\n

        The heat-resistant temperature of the ABS main body and the PE ball is about 70-80 degrees. For the auxiliary water tank that stores cold water, although there is strong sun exposure, the water temperature in the water tank will still be below 50-60 degrees. It is within the temperature resistance range of ABS products, so there is no worry about deterioration. <\/p>\n\n\n\n

        • \"Stainless
          Stainless steel float is resistant to high temperature<\/figcaption><\/figure><\/li>
        • \"Water
          ABS valve body and stainless steel float<\/figcaption><\/figure><\/li><\/ul><\/figure>\n\n\n\n

          Install this product in the cold water tank, it is really just the right size. <\/p>\n\n\n\n

          • \"\"
            Water tank float valve<\/figcaption><\/figure><\/li>
          • \"\"
            ABS float valve – The size is just right<\/figcaption><\/figure><\/li><\/ul><\/figure>\n\n\n\n

            f you are afraid that the water in the water tank is too hot, you can try to usestainless steel float.<\/strong> <\/p>\n\n\n\n

            \n